Download Our
Adept Mobile App
Get a Free Quote
 

Get a Free Quote

Check if GPS is Required  
Check if UTS is Required  
City:   
  Yes   No
  Yes   No
Number of Weeks/Months:  
            Possible Start Date: 
 

140H Motor Grader

Engine
Engine Model Cat 3176 ETA, Variable HP
Base Power (all gears) Net 123 kW 165 hp
VHP - gears 1-3 Net 123 kW 165 hp
        - gears 4-8 Net 138 kW 185 hp
VHP Plus - gears 1-3 Net 123 kW 165 hp
                - gears 4-6 Net 138 kW 185 hp
                - gears 7-8 Net 153 kW 205 hp
Base Power (all gears) Gross 136 kW 182 hp
VHP - gears 1-3 Gross 136 kW 182 hp
        - gears 4-8 Gross 151 kW 202 hp
VHP Plus - gears 1-3 Gross 136 kW 182 hp
               - gears 4-6 Gross 151 kW 202 hp
               - gears 7-8 Gross 166 kW 222 hp
Displacement 10.3 L 629 in3
    Bore 125 mm 4.9 in
    Stroke 140 mm 5.5 in
Torque rise 50 %  
Max torque @ 1000 rpm 1095 N.m 808 lb ft
 
 
 
Speed @ rated power 2000 RPM  
Number of cylinders 6  
Derating altitude 3048 m 10,000 ft
Std - Fan speed - max 1210 RPM  
- min 500 RPM  
Std - Ambient Capability 47°C 117°F
Hi Ambient - Fan speed - max 1300 RPM  
- min 500 RPM  
Hi - Ambient Capability 50°C 122°F
  • Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
  • VHP and VHP Plus are optional arrangements.
  • Net power advertised is the power available at rated speed of 2000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • No derating required up to 3048 m (10,000 ft) altitude. Deration rate of 1.5% per 304.8 m (1000 feet) above 3048 m (10,000 feet).
 
Power Train
Forward/Reverse Gears 8 fwd/6 rev  
Transmission Direct drive, power shift
Brakes - service air-actuated, oil-disc
- service, surface area 23 948 cm2 3,712 in2
- Parking manual, multiple oil-disc
- Secondary air actuated, oil-disc
 
   
Hydraulic System
Circuit type Closed center load sense
Pump type axial piston  
Pump output @ 2100 RPM 206 L/min 54.4 gal/min
Maximum system pressure 24 150 kPa 3,500 psi
Reservoir tank capacity 38 L 9.9 gal
Standby pressure 3100 kPa 450 psi
Operating Specifications
Top Speed - Fwd. 44 km/h 27.4 mph
- Rev. 34.7 km/h 21.6 mph
Turning radius (outside front tires) 7.5 m 24.6 ft
Steering range - left/right 50°  
Articulation angle - left/right 20°  
Fwd. 1st 3.8 km/h 2.3 mph
2nd 5.1 km/h 3.2 mph
3rd 3rd 7.4 km/h 4.6 mph
4th 10.3 km/h 6.4 mph
5th 16.2 km/h 10 mph
6th 22 km/h 13.7 mph
7th 30.3 km/h 18.8 mph
8th 44 km/h 27.4 mph
Rev. 1st 3 km/h 1.8 mph
2nd 5.6 km/h 3.5 mph
3rd 8.1 km/h 5 mph
4th 12.8 km/h 7.9 mph
5th 23.9 km/h 14.8 mph
6th 34.7 km/h 21.6 mph
Service Refill
Fuel tank 397 L 105 gal
Cooling system 38 L 10 gal
Hydraulic system - total 80 L 20.8 gal
- tank 38 L 9.9 gal
Engine oil 39 L 10.2 gal
Differential/Final drives 47 L 12.4 gal
Tandem housing (each) 64 L 16.9 gal
Circle drive housing 7 L 1.8 gal
Front wheel spindle bearing housing 0.5 L 0.13 gal
 
Frame
Circle - diameter 1530 mm 60.2 in
- blade beam thickness 30 mm 1.2 in
Drawbar - height 127 mm 5 in
- thickness 76 mm 3 in
Front-top/bottom plate - width 305 mm 12 in
- thickness 25 mm 1 in
Front-side plates - width 241 mm 9.5 in
- thickness 12 mm 0.5 in
Front-linear weights - min 165 kg/m 112 lb/ft
- max 213 kg/m 144 lb/ft
Front-section modulus - min 2083 cm3 127 in3
- max 4785 cm3 291 in3
Front axle - ground clearance 625 mm 24.6 in
- front wheel lean 18°  
- oscillation angle 32°  
Tandems
Height 506 mm 19.9 in
Width 201 mm 7.9 in
Sidewall thickness - inner 16 mm 0.63 in
- outer 18 mm 0.71 in
Drive chain pitch 51 mm 2 in
Wheel axle spacing 1522 mm 60 in
Tandem oscillation - forward 15°  
- reverse 25°  
Moldboard
Blade width 3658 mm 12 ft
Moldboard height 610 mm 24 in
Thickness 22 mm 0.87 in
Arc radius 413 mm 16.25 in
Throat clearance 120 mm 4.7 in
Cutting edge - width 152 mm 6 in
- thickness 16 mm 0.63 in
End bit - width 152 mm 6 in
- thickness 16 mm 0.63 in
Blade pull - max GVW 19 135 kg 42,184 lb
- base GVW 13 209 kg 29,121 lb
Down pressure - max GVW 13 017 kg 28,698 lb
- base GVW 7098 kg 15,648 lb
  • Blade Pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Vehicle Weight (GVW).
Blade Range
Circle centershift - right 728 mm 28.7 in
- left 695 mm 27.4 in
Moldboard sideshift - right 660 mm 26 in
- left 524 mm 20.6 in
Maximum blade position angle 90°  
Blade tip range (forward) 40°  
(backward) 5°  
Maximum shoulder reach outside of tires
- right 1978 mm 77.9 in
- left 1896 mm 74.6 in
Maximum lift above ground 480 mm 18.9 in
Maximum depth of cut 715 mm 28.1 in
Ripper
Ripping depth, maximum 462 mm 18.2 in
Ripper shank holders 5  
Ripper shank holder spacing 533 mm 21 in
Penetration force 8047 kg 17,740 lb
Pryout force 9281 kg 20,460 lb
Machine length increase, beam raised 970 mm 38.2 in
Scarifier
Front, V-Type: Working width 1184 mm 46.6 in
Scarifying depth,maximum 292 mm 11.5 in
Scarifier shank holders 11
Scarifying shank holder spacing 116 mm 4.6 in
Front, straight: Working width 1800 mm 71 in
Scarifying depth,maximum 317 mm 12.5 in
Scarifier shank holders 17
Scarifying shank holder spacing 111 mm 4.38in
Rear: Working width 2300 mm 91 in
Ripping depth, maximum 411 mm 16.2 in
Scarifier shank holders 9
Scarifier shank holder spacing 267 mm 10.5 in
 
Weights
Gross Vehicle Weight - max 21 261 kg 46,872 lb
- front wheels 7590 kg 16,733 lb
- rear wheels 13 671 kg 30,139 lb
Gross Vehicle Weight - base 14 677 kg 32,357 lb
- front axles 4138 kg 9,123 lb
- rear axles 10 539 kg 23,234 lb
  • Base operating weight calculated on standard machine configuration with 14.00-24 10PR (G-2) tires, full fuel tank, coolant, lubricants and operator.
Cab
ROPS (Rollover Protective Structure) meets the following criteria: SAE J396, SAE J1040 APR 88, ISO 3471:1986, ISO 3471:1974
FOPS (Falling Object Protective Structure) meets the following criteria: SAE J231 JAN 81, ISO 3449:1984, ISO 3449:1992 Level II
Brakes
Brakes meet the following standards: SAE J1473 OCT 90.